24"H x 34"W x 1 1/8" Thick W/ 2" x 6.5" Brick Pattern

More Views

24"H x 34"W x 1 1/8" Thick W/ 2" x 6.5" Brick Pattern
$0.00

Availability: In stock

24"H x 34"W x 1 1/8" Thick W/ 2" x 6.5" Brick Pattern


 


* Required Fields

Description

Details

What is the purpose of refractory panels for fireplaces?

Refractory brick panels reflect heat, generated from the fire, back into the room. Most factory built and 0 clearance fireplace manufacturers require replacement of refractory brick panels when a dime can be inserted into the crack or when the surface of the refractory panel has deteriorated more than ¼” from the original surface. Fireside Chimney Supply offers DIY cut to fit refractory panels for fireplaces in 5 different sizes and brick patterns.

Refractory Brick Panels Curing Process

Important:


This process must be followed or you risk the chance of cracking your new refractory panels.

1) Once your refractory panel is received, store for 24 hours at room temperature.

2) Refractory panel can be cut to fit and installed at this point.  Allow an additional 24 hours with no fires

3) Light six small curing fires allowing the refractory panel to cool after each fire.  A curing fire consists of lighting a small bundle of kindling or cutting a Dura-Flame log into six pieces for the six fires. Burn each fire for 1/2 an hour.

The small curing fires are required in order to dry the moisture in the refractory brick panels. You do not want to heat the moisture. Once this is accomplished you can have normal fires.

NOTE:
Due to the nature and fragility of freshly made refractory panels for fireplaces a representative must be present to accept delivery and inspect for damage. A signature will be required. Any additional freight charges due to missed appointments will be at the expense of the homeowner. If damage occurs in shipment the package must be refused and returned to Fireside Chimney Supply before the driver leaves. Fireside Chimney Supply will not be responsible for damage to the product once shipment has been delivered.

Back Panel Removal

When removing the back panel you must go slow and easy due to old panels breaking easily. Remove the side without the gas line by unscrewing the retaining clip located at the top front of the refractory panel
Take the panel out of the firebox
Measure the size of the old panel length & height. Mark your size  to fit the new panel and cut using a masonry blade
Install the new refractory panel using the retaining clips
Reinstall old side panel with retaining clip
A small fire must be maintained for the first few hours to allow the panels to cure

Side Panel Removal

Remove the retaining clip of the panel you want to replace
Measure the size of the old panel length & height. Mark your size  to fit the new panel and cut using a masonry blade like our diamond cutting blades.
Install the new refractory panel using the retaining clips
A small fire must be maintained for the first few hours to allow the panels to cure

Bottom Panel Removal

Remove all panels from the firebox beginning with the side refractory panels and ending with the bottom panel
Measure the size of the old panel . Mark your size  to fit the new panel with the smooth edge toward the front of the firebox and cut using a masonry blade (Diamond blades available below)
Install the new refractory panel with smooth edge toward the front of the firebox
Reinstall the back and side refractory panels using the retaining clip.
A small fire must be maintained for the first few hours to allow the panels to cure

Reviews

Customer Reviews 1 item(s)

Great product and service
Need to replace a cracked/crumbled firebrick in my fireplace. This product was exactly what I need, was delivered promptly and was easy to install. The price was reasonable for what I needed well worth the investment to have a working fireplace.
Quality
Price
Value
Review by Brian Houston / (Posted on 1/9/2017)